Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Torrance?
Chimney liner and rebuild work in Torrance, CA typically costs between $3,800 and $12,500 in 2026, with most homeowners paying around $6,500 to $8,000 for a complete stainless steel liner replacement plus partial masonry rebuild. A standalone liner installation (no masonry work) usually runs $2,800 to $5,500, while a full chimney tear-down and rebuild from the roofline up starts at $8,000 and can exceed $18,000 for larger chimneys with custom brick matching. These are real numbers from the Torrance market, where we’ve been pricing and performing this exact work since 2003.
Key Takeaways
- Chimney liner replacement alone: $2,800 – $5,500 in Torrance
- Liner plus partial rebuild: $6,500 – $8,000 for a typical single-story home
- Full chimney rebuild from roofline: $8,000 – $18,000+ depending on height, access, and brick match
- Most Torrance jobs with Hadley Chimney Torrance are completed in 1 to 3 days
- Written price before work starts, every time. No exceptions.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s what our team sees daily across Torrance, from Seaside to Walteria to Old Torrance. These ranges reflect what you should actually expect to pay, not vague national averages that don’t account for South Bay labor rates, coastal air corrosion, or the specific building styles common here.
| Scope of Work | Typical Torrance Price Range | What’s Included |
|---|---|---|
| Stainless steel liner installation (standard, 1 story) | $2,800 – $4,200 | DuraFlex or equivalent liner, top plate, rain cap, minor flue prep |
| Stainless steel liner installation (2 story or complex flue) | $4,000 – $5,500 | Longer liner run, additional scaffolding or lift access, more labor |
| Liner + crown repair | $3,500 – $6,000 | Liner installation plus concrete crown rebuild with proper overhang and drip edge |
| Liner + partial masonry rebuild (top 8-15 courses) | $6,000 – $9,500 | Brick or block replacement, mortar matching, crown, liner, flashing |
| Full chimney rebuild from roofline | $8,000 – $14,000 | Complete teardown, new masonry, liner, crown, flashing, cap |
| Full chimney rebuild with custom brick match, larger chimney | $14,000 – $18,000+ | Harder brick sourcing, taller structure, complex roofline access |
| HeatShield cerfified resurfacing (as an alternative to full liner) | $2,200 – $4,500 | Ceramic coating applied inside existing flue to seal cracks and gaps |
Those numbers shift based on a few realities specific to Torrance. Homes in the Hollywood Riviera and Southwood neighborhoods tend to have chimneys built in the 1950s and 60s with softer mortar that crumbles faster. If you live near the coast, salt air accelerates brick spalling (the surface flaking you’ll notice on older chimneys). And if your home sits on a hillside lot, scaffolding and equipment access can add $500 to $1,500 to the job.
One thing that never changes with us: you get a written price before anyone picks up a tool. Not a range, not an estimate that swells. A number, on paper, before work starts.
What Affects Chimney Liner & Rebuild Pricing in Torrance
Chimney work isn’t one-size-fits-all, and Torrance has enough housing variety to prove it. Here’s what moves your final number up or down.
- Chimney height and roof pitch. A single-story ranch in Torrance Gardens with a 4/12 roof is a fast job. A two-story in the Hollywood Riviera with a steep pitch needs more safety equipment, more setup time, and more labor. That’s real money.
- Access to the chimney. Hillside homes on narrow streets can make it impossible to position a lift. If our techs are carrying materials up 40 feet of ladder, that adds a few hundred in labor that a flat-lot home won’t see.
- Masonry condition below the roofline. Sometimes we show up for a liner and discover the brick below the roof deck is hollowed out. Hidden damage is the single biggest reason a quote turns into a full rebuild. Being honest about it up front is why we take before-and-after photos so you can see exactly what we found.
- Existing flue size and shape. Older Torrance chimneys often have clay tile flues that aren’t a modern standard size. If your flue is undersized or odd-shaped, we may need to size a custom liner or do prep work to get it to fit. Brand matter here too: we work with DuraFlex, Gelco, and Olympia Chimney liners because they hold tolerances well.
- Brick and mortar matching. If we’re rebuilding, you don’t want a two-tone chimney. Torrance’s older homes used specific brick colors that aren’t always sitting on the shelf at a local yard. Sourcing a good match takes time and sometimes costs a bit more. Worth it, but worth knowing.
- Permit requirements. The City of Torrance requires permits for structural masonry rebuild work. Permit fees vary by project scope and typically run $150 to $500, and we handle the paperwork. This is not optional, and hiring someone who skips it can bite you when you sell the house.
Do You Need a New Liner or a Full Rebuild? How to Tell
This is the question we’d rather answer honestly than upsell. A liner and a rebuild solve different problems, and the fix should match the damage. Here’s how our techs think about it on every Torrance job.
- You need a liner if: your flue has cracked clay tiles, you’re converting to a new appliance, or you’re seeing smoke leakage inside the home. Stainless steel liners from brands like DuraFlex run $2,800 to $5,500 installed. We size them to your appliance and flue, then run a camera up to confirm the fit.
- You need a rebuild if: the brickwork is spalling, the chimney is leaning, or there’s visible gap between the mortar joints. Once the structure itself is compromised, a liner won’t fix it and installing one would be putting a new pipe inside a failing wall. Rebuilding from the roofline addresses the structural failure.
- You need both if: the flue is shot and the masonry above the roof deck is failing. This is the most common scenario in Torrance homes built in the 60s and earlier. Doing both at once is almost always cheaper than staging them separately, since we’re already on the roof with the equipment.
If you’re genuinely not sure which camp you’re in, call us. Cory Mitchell and the Hadley Chimney Torrance team will inspect, take photos, and walk you through what we found. That inspection and the written estimate that follows are free.
How to Save on Chimney Liner & Rebuild
Nobody wants to spend more than necessary. Here’s what actually saves money on chimney work in Torrance, without cutting corners that come back to haunt you.
- Combine work when it makes sense. If you already know you need a liner and your crown is cracked, do the crown at the same time. Coming back a second time means paying for setup twice.
- Act on problems early. A cracked crown that costs $800 to replace today becomes a $4,000 masonry repair in three years once water gets in. Water is the enemy of chimney masonry, especially with coastal moisture here.
- Get a camera inspection before you commit. Any real chimney company should be able to show you photos of what the inside of your flue looks like. If they won’t, walk. A camera inspection tells you if you need the full liner or if a HeatShield resurfacing will do the job for half the cost.
- Don’t choose the cheapest bid by default. The lowest bid usually means cheapest materials, skipped permits, or a crew without proper safety gear. A botched chimney rebuild costs twice as much to fix as it does to do right the first time. We’ve been called out to redo work from discount companies more times than we can count.
- Ask about the guarantee before you sign. Every repair we make comes with our 365-Day Done Right Promise in writing, and a free second visit if it fails. That’s not a promo. It’s how we work, and it means if something isn’t right, you’re not paying again.
Want a number for your specific chimney? Call (424) 358-3187 and we’ll get you scheduled. The estimate is free, and the price we give you in writing is the price you pay.
Why Torrance Homeowners Call Hadley Chimney Torrance
We started Hadley Chimney Sweep in 2003, and the biggest complaint we heard from homeowners then is the same one we hear now: nobody answers the phone and nobody shows up when they say they will. So we built the company around fixing that.
When you call (424) 358-3187, a live person answers. Not an answering service, not a voicemail that says we’ll call you back. A person, at 2pm or 2am. We’ve been doing that for 22 years.
Before our tech arrives, you’ll get live arrival tracking, the kind you’d expect from a food delivery app, not a contractor. The tech is background-checked and uniformed. When he’s on the roof, he’s taking photos of what he finds. You’ll see them along with the written price before any work begins. That’s The Relay Visibility Guarantee, and it’s on every job we do, not just the big ones. We’re independently owned as part of the Relay Home Co. family, held to The Relay Standard.
We work with industry-standard materials: DuraFlex flexible liner systems, HeatShield ceramic repair compound, Gelco, Olympia Chimney, Famco, and Copperfield chimney accessories. These are the brands working chimney professionals actually use, not whatever is cheapest on the shelf.
Most importantly, every repair comes with a written guarantee and our 365-Day Done Right Promise. If it’s not done right, we make it right. That includes a free second visit if the repair fails. We put that in writing because trust shouldn’t be verbal.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Torrance?
A stainless steel chimney liner in Torrance costs $2,800 to $5,500 installed, depending on whether it’s a single-story or two-story home and what prep work the flue needs. This is a DuraFlex-grade liner sized to your appliance, with a top plate and rain cap included. Call (424) 358-3187 for an exact quote, free of charge.
How much does a full chimney rebuild cost in Torrance?
Full chimney rebuilds in Torrance run $8,000 to $18,000+, with the price driven by chimney height, brick matching, and access. A standard single-story chimney on a flat lot with common brick is on the lower end, while a hillside home with custom brick and a steep roof lands higher. We’ll give you a written, itemized price before work begins.
Is it cheaper to repair or rebuild a chimney?
Repair is almost always cheaper than full rebuild if the structure below the roofline is sound. Patching a crown or tuckpointing mortar might cost $800 to $2,500, while full rebuilds start at $8,000. The honest answer requires a camera inspection and a masonry assessment. We’ll show you photos of what we find and recommend the minimum scope that actually fixes the problem.
How long does a chimney liner or rebuild take in Torrance?
Most liner installations are done in one day. A partial rebuild with liner typically takes two to three days. Full rebuilds can run four to seven days depending on weather and masonry curing time. We’ll give you a clear schedule before work starts, and you’ll get live arrival tracking every morning.
Are permits required for chimney rebuilds in Torrance?
Yes. Structural masonry rebuilds require a permit from the City of Torrance, and permit fees typically add $150 to $500 to the job. We handle the paperwork on our end. Skipping permits can cause problems when you sell the house, and it can invalidate your insurance. Worth the fee.
Does homeowners insurance cover chimney liner or rebuild costs in Torrance?
Sometimes. If the damage is from a covered event like an earthquake, fire, or a falling tree, your policy may cover part or all of the rebuild. If the damage is from years of deferred maintenance, which is the most common situation we see with spalled brick and cracked crowns, insurance generally won’t cover it. We recommend taking photos of chimney damage as soon as you notice it and calling your adjuster. We’re happy to provide documentation of condition before and after.
Get Your Free Torrance Chimney Estimate
If your chimney needs a liner, a rebuild, or you’re not sure which, start with a phone call. We’ll talk through what you’re seeing, answer your questions, and get you on the schedule for a free inspection. You’ll get a written price before any work starts. That’s how we’ve done it since 2003, and how we’ll do it for you.
Call Hadley Chimney Torrance at (424) 358-3187. A live person answers, 24/7. If you’d rather start online, brush up on our home page first, then have a look at Chimney Liner & Rebuild in Torrance to see the service in detail.
Pricing reflects the Torrance market as of 2026. Hadley Chimney Torrance offers free estimates – call (424) 358-3187.
Written by Cory Mitchell, Owner at Hadley Chimney Torrance, serving Torrance since 2003.
What Our Customers Say
"Gas fireplace wouldn't light. He replaced the thermocouple and cleaned the pilot. Works every time."
- Ivan M."Good sweep. The window was a bit wide, but updates kept me informed."
- Gabe S."Got a text with a photo report after the inspection. Cracked crown spotted and fixed the next week."
- Rena G.