Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Redondo Beach
Chimney repair in Redondo Beach usually costs between $350 and $2,800 depending on what’s failing. Flashing jobs sit at the lower end, while a partial rebuild lands higher. Most repairs here are driven by one thing: salt air. If you’re seeing rust stains down your chimney face or damp spots near the firebox, call us at (424) 358-3187 and we’ll send a background-checked tech who shows up in a tracked window with a camera, not a clipboard and a vague estimate.
We work the Avenues, the Esplanade, Riviera Village, and every street in between. Our crews know what the marine layer does to mortar and steel, because we see it weekly. You’ll get a written price before any work starts, plus before-and-after photos so you know exactly what was fixed and why.
Why Hadley Chimney Torrance Is Redondo Beach’s Preferred Chimney Repair Company
Hadley Chimney Sweep has been doing chimney work since 2003, and our Chimney Repair team handles everything from small mortar patches to full stack rebuilds. Redondo Beach homeowners call us because we explain the problem in plain English, show camera footage of the damage, and never recommend work a flue doesn’t need. That last part matters here more than almost anywhere.
We answer the phone with a live person 24/7. No callbacks, no answering service. When you book, you get a tracked arrival window and the name of your tech before they pull up. Every repair carries the 365-Day Done Right Promise: a written guarantee, and if the repair fails within a year, our second visit is free. Not an upsell. Standing policy.
Our technicians know Redondo Beach’s housing stock: 1950s and 60s single-family homes with original clay-tile flues, plus multi-story condos and townhomes near the water with stacks exposed to constant salt spray. That local familiarity means we diagnose faster and quote accurately the first time.
Styles & brands we work with
Chimney Flashing Repair in Redondo Beach
Chimney Flashing Repair in Redondo Beach is the single most common job we do here, and the reason is geographic. Flashing is the metal strip where the chimney meets the roofline. In most cities, it fails from age. In Redondo Beach, galvanized flashing fails early because salt spray eats through the zinc coating, and once that protective layer is gone, bare steel rusts within a few seasons. Water then finds its way behind the chimney chase and into the attic or ceiling. If you have a brown stain spreading across your ceiling near the fireplace, there’s a good chance the flashing is the culprit.
What a proper flashing repair involves here: removing the old metal, checking the underlying wood for rot, installing new flashing with proper step and counter-flashing, and sealing the joint with a marine-grade sealant, not the cheapest caulk on the shelf. A typical flashing repair in Redondo Beach runs $450 to $1,100 depending on access, roof pitch, and how much old material needs to come out.
Salt Corrosion at the Roofline
Homes west of Pacific Coast Highway get hit hardest. The breeze off Santa Monica Bay carries fine salt particles that settle into every seam. We see flashing on Esplanade homes that’s rusted through in under ten years. When we replace it, we recommend stainless steel or copper flashing for ocean-facing homes, because a second galvanized fix will be back in the same condition before long.
Sealing the Chase and Vents
Sometimes the flashing itself is fine but the chimney chase top and side vents are letting water in. We inspect the whole intersection, not just the visible metal. Camera work before and after shows you exactly what we sealed and why.
Chimney Crown Repair in Redondo Beach
Chimney Crown Repair in Redondo Beach matters because the crown is the concrete slab that caps the top of the chimney and sheds water away from the flue. A sound crown keeps the stack dry. A cracked crown lets moisture pool on top of the chimney, then soak into the brick and mortar below. Near the coast, that trapped moisture expands as salt crystals form, spalling the brick face and weakening the structure from the top down. It’s a slow failure, but by the time you see chunks of concrete on the roof, the repair bill has grown.
A crown repair typically involves filling and sealing cracks, then waterproofing the surface so future moisture beads off instead of soaking in. For Redondo Beach, we apply a breathable waterproofing membrane after every crown patch. A standard crown repair here runs $350 to $750. If the crown is too far gone, we remove and repour it for $900 to $1,800.
Why Crowns Crack Near the Ocean
The marine layer keeps crowns damp for hours every morning. That moisture cycle, combined with direct afternoon sun, repeated for decades, is brutal on concrete. Older Redondo Beach chimneys were also poured with a shallow slope, so water pools instead of running off. We correct that pitch during repairs.
Spalling Brick Below the Crown
Spalling is when the brick face flakes and pops off. It’s a symptom, not the disease. If we only patch the crown and ignore the damaged brick below, the chimney continues to shed material onto your roof. We photograph the full crown-to-roofline run so you see the complete condition.
Trusted Brands We Service in Redondo Beach
We work with materials that hold up in coastal conditions, not whatever is cheapest on the truck. For Redondo Beach chimneys, that means stainless steel caps from Olympia Chimney, flexible liner systems from DuraFlex, and Copperfield chimney accessories. We keep common cap sizes and flashing stock in rotation for fast turnaround, and when a part needs to be ordered, you’ll know the timeline before we leave the driveway. If your existing cap, damper, or liner came from Famco or HeatShield, we service and replace those too. The point is parts built for salt air and marine humidity, so a repair here lasts longer than a few winters.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Redondo Beach Homes
- Rusted dampers that seize shut. The throat damper sits just above the firebox, and coastal humidity rusts the hinge until it won’t open. This forces homeowners to burn with the damper stuck, which wastes heat and can pull smoke back into the living room.
- Cracked clay-tile flue liners. Most 1950s and 60s homes in Redondo Beach were built with terra cotta liners. Decades of fires, plus moisture from the marine layer, cause thermal shock cracks. Once cracked, the flue can’t safely contain creosote or combustion gases.
- Flashing eaten through by salt spray. Galvanized steel and ocean air are a losing combination. Homes within a few blocks of the Esplanade often need flashing replaced years before the roofline itself shows any wear.
- Crown cracks allowing water into the stack. Pooled moisture creates freeze-thaw cycles, even in a mild climate. Add salt to that water and the spalling accelerates. Crown neglect becomes brick replacement faster than most homeowners expect.
Last month our crew repaired a chimney on Esplanade where the salt breeze had rusted the damper so badly it wouldn’t open. We replaced the damper with a stainless steel model and installed a new Olympia Chimney cap to stop the corrosion, then showed the homeowner our camera footage of the repaired flue before sealing everything up.
Pricing for Chimney Repair in Redondo Beach, CA
Here’s what you can expect to pay in Redondo Beach. Minor mortar repointing and small crown patches run $350 to $600. Flashing replacement falls between $450 and $1,100. A full chimney crown repour is $900 to $1,800. Spalling brick repair, where we cut out damaged brick and replace it, runs $700 to $1,500 depending on how many courses are affected. A full chimney rebuild, where the stack is taken down past the roofline and rebuilt, starts around $2,800 and goes up from there. What moves the number: roof access difficulty, stack height, ocean exposure, and whether we’re matching existing brick. You get a written price before anyone picks up a tool, and the free estimate comes with camera photos of what we found. Call (424) 358-3187 to schedule.
We Also Serve Cities Near Redondo Beach
Our crews cover the South Bay, and that includes regular work in Hermosa Beach, Torrance, Manhattan Beach, and Lawndale. If you’re in one of those areas, the same tracked arrival, written pricing, and photo documentation applies. You can read more about our Chimney Repair in Redondo Beach coverage or call us directly to check availability for your street.
Serving Redondo Beach, CA - Our Local Coverage Area
We’re based in the Redondo Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Redondo Beach
Salt air corrodes galvanized flashing years before it would fail inland. The zinc coating breaks down, bare steel rusts through, and water enters behind the chimney. If you’re within a mile of the ocean, expect flashing to need replacement every 8 to 12 years. We replace failed flashing with stainless steel or copper, and we’ll show you the removed metal so you can see the rust with your own eyes. Call (424) 358-3187 for a flashing inspection.
Sometimes, yes. If the spalling is limited to the crown surface and the brick below is still solid, repointing and re-sloping the crown works. If the brick face is flaking across multiple courses, repointing alone won’t hold and you’ll be back in the same spot within a few years. We’ll show you camera photos of the damage depth before recommending either path. That way you’re deciding based on evidence, not a sales pitch.
Yes, and it’s often required by the HOA before any repair. Condo and townhome chimneys in Redondo Beach are frequently shared stacks with multiple flues, so a problem in one unit can affect neighbors. We inspect the full stack, identify which flue is yours, and provide the written documentation most HOAs request before approving work. The inspection includes photos, so you have something to show the board.
Flashing replacement, driven by salt corrosion, tops the list. Right behind it: cracked clay-tile flue liners in 1950s and 60s homes, and rusted dampers that seize from the marine humidity. If you have a chimney from that era and haven’t had it inspected recently, those are the three things we look at first. You’ll see photos of each before anyone recommends a repair.
Because the chimney industry has a long history of upselling repairs homeowners can’t see. A camera inspection shows you the actual crack, the actual rust, the actual spalled brick. In Redondo Beach, where older homes often have unlined or clay-tile flues, some companies use that age to sell full liner replacements when a simpler repair would do. We don’t. Nothing gets recommended unless we can show you the footage and explain why it matters now versus later. You’ll get that video by text before you’re asked to approve anything.
Need a chimney repair in Redondo Beach? Call (424) 358-3187 for a free estimate. We’ll show up in a tracked window, give you a written price, and send photos of everything we find and fix.
Written by Cory Mitchell, Owner at Hadley Chimney Torrance, serving Redondo Beach since 2003.